Zinc alloy aluminum die casting technology worker safety practices
Release date:2013-12-03 00:00 Source:http://www.mingliyxl.com Views:
1. The operator must be certified.
2. The operator must wear personal protective supplies.
3. The operator must be familiar with the structure, performance, working principle and debugging methods to operate the equipment, and carefully read the operating instructions, in strict accordance with the rules and operations equipment. - Dongguan die casting machine parts
4 die casting machine operation:
4.1 The operator must do a comprehensive inspection of the safety devices equipment, instrumentation, lubrication, cooling systems and equipment before starting, to ensure good and effective.
4.2 The operator inserts installed, you must wear gloves to prevent hot.
4.3 Equipment operation operator (including other people) can not enter the danger zone. Prevent scratches and burns.
4.4 to filling liquid aluminum holding furnace operator (including other people) to stay away from the truck and holding furnace, molten aluminum to prevent splashing wounding.
4.5 disassembly process to mold the correct selection of a sling and disassembly methods and check whether there is mold steel tight security devices to prevent mold injured by falling equipment and personnel.
5. Holding Furnace Operation:
5. l long unused new furnace and stove, oven dried before use, to prevent filling of liquid aluminum splash explosion burns man.
5.2 The operator should always check whether the burnt wires, damaged, lap equipment exposed metal parts to prevent electric shock.
5.3 filling liquid aluminum holding furnace must be a power outage.
5.4 Cleanup liquid aluminum dross, heated lid lifting sling to correct selection, press the rules and operations; heated lid to landing place, may not have been hanging in the air; while reducing furnace slag to be clean up personnel should wear appropriate protective equipment (such as gloves, goggles); slag cleared, heating cover to its original position, the wiring is correct, and the shield is installed securely.
6 shift operator should properly recorded.
2. The operator must wear personal protective supplies.
3. The operator must be familiar with the structure, performance, working principle and debugging methods to operate the equipment, and carefully read the operating instructions, in strict accordance with the rules and operations equipment. - Dongguan die casting machine parts
4 die casting machine operation:
4.1 The operator must do a comprehensive inspection of the safety devices equipment, instrumentation, lubrication, cooling systems and equipment before starting, to ensure good and effective.
4.2 The operator inserts installed, you must wear gloves to prevent hot.
4.3 Equipment operation operator (including other people) can not enter the danger zone. Prevent scratches and burns.
4.4 to filling liquid aluminum holding furnace operator (including other people) to stay away from the truck and holding furnace, molten aluminum to prevent splashing wounding.
4.5 disassembly process to mold the correct selection of a sling and disassembly methods and check whether there is mold steel tight security devices to prevent mold injured by falling equipment and personnel.
5. Holding Furnace Operation:
5. l long unused new furnace and stove, oven dried before use, to prevent filling of liquid aluminum splash explosion burns man.
5.2 The operator should always check whether the burnt wires, damaged, lap equipment exposed metal parts to prevent electric shock.
5.3 filling liquid aluminum holding furnace must be a power outage.
5.4 Cleanup liquid aluminum dross, heated lid lifting sling to correct selection, press the rules and operations; heated lid to landing place, may not have been hanging in the air; while reducing furnace slag to be clean up personnel should wear appropriate protective equipment (such as gloves, goggles); slag cleared, heating cover to its original position, the wiring is correct, and the shield is installed securely.
6 shift operator should properly recorded.